Tel: 1-905-475-2380
Fax: 1-905-475-2303
email: sales@kosim.ca
Products
Monthly Special!


TRACTION, INTERSEGMENTAL, & OTHER TABLES


| |
|
OTHER TABLES
|

Traction, Stationary, Intersegmental, & other Tables



14-3591 Chattanooga Montane Dolomites 2 Section Examination / Treatment Table
Your table is the core of your practice, and with Montane, you have a trusted partner. Every detail has been designed, engineered and crafted to elegant, exacting standards, delivering a refined experience that maximizes patient comfort while optimizing practitioner access and ease of operation.
Features:
• Size: 201cm x 69cm x 49 - 101cm (80"L x 27"W x 19.2-40"H)
• Includes side rails for patient safety
• Electric high/low height adjustment from 49 to 101 cm (19.2" - 40") for easy and safe patient transfer and adjustment to the ideal working height for treatment
• Easy access foot bar activate, accessible from any position around the table 360°, for simple height adjustment
• Features smooth vertical lift with a capacity up to 150 kg (330 lbs)
• Includes simple to use paper roll holder
• Available in 4 casters
• Adjustable head support - positive/negative inclinations
• Face hole on head section with removable cushion
• Side brackets for stabilizing belts are standard equipment
• Gas springs assist in the adjustment of head section
• Paper holder
• Weight: 110Kg (242 lbs) / Shipping: 140Kg (308 lbs)
• Made in Europe
14-3008 Hi-Lo SX-1072 Changing Table
Hi-Lo Changing Table with one section top piece and side rails that pivot down for easy patient transfer and access. Sturdy X-Frame design uses 11 gauge steel tubing. The motorized table effectively lowers to 18" above the floor for easy access, allowing patient transfer with little assistance. This helps eliminate back strain and pain from lifting and transferring patients. Also, with a motorized elevation of 37", the caregiver can tend to the patient in an upright position. The SX Series Changing Tables are ideal for those facilities accommodating children and adults with special needs.
• 1-Section Changing Table with Side Rails
• 60"L or 72"L x 27"W
• Min. Height: 18"
• Max Height: 37"
• 1 1/2" Firm Density Foam
• 400 lbs Capacity
• 4 Total Lock Swivel Casters
• Made in USA
13-1403 The Osteopathic Table
The Osteopathic / Craniosacral tables cost less than most tables on the market today, yet sacrifices nothing in quality or efficiency. Available in 1 or 2 section configuration, all models are available as mobile or stationary. With an electric variable height adjustment, durable steel frame and white epoxy finish, the Osteopathic table is sound choice for your osteopathic / craniosacral needs. Other options include a contoured foot section, numerous colour choices and custom widths.
Specifications:
Weight: 165lbs, Height range: 19” to 38”, Available widths: 27” or 30”x73”, Working weight: 450lbs (205kgs), 2” High Density Foam, 115 or 220 volt available
Options:
Head Cradle $45.00, Head Cushion $50.00, Mobile $150.00, Tilt back $150.00, Dual Foot Control $120.00
14-3059 5-Section BAX-5000 Manual Therapy Treatment Table
Bar Activated Hi-Lo Control Treatment Table with Powered Elevating Center and 3 Piece Head Section
Bar activated Hi Lo control allows control of the table height while keeping both hands on the patient and both feet on the floor. The control is designed to allow easy access from anywhere around the table without disrupting the treatment.
The center section is motorized to allow positioning with the patient’s full weight on the table. The center section motor controls are located on each side of the center section to allow adjustment without losing contact with the patient.
• Capacity: 400 lbs
• Height range 19” – 38”
• Top Section: Three Piece Width: 27" Length: 72"
• Head Section: 15” x 13” Raises 25 degrees - Lowers 45 degrees. Contoured Face/ Nose Opening. The armrests have a range of 6” vertical adjustment while remaining on a plane with the center section.
• Center Section: 19” x 27” Motorized to Raise 15 degrees
• Foot Section: 38" x 27", Raises 70 degrees.
• Made in USA
14-3054 AM-SP575 MOBILIZATION TABLE
• TABLE TOP: 77"L X 25"W
• HEAD SECTION: 17" X 13"
RAISES 25°
LOWERS 20°
• ARM RESTS: 15"L X 5"W
LOWERS 10"
• CENTER SECTION: 17.5"L X 25"W
• FOOT SECTION: 41"L X 25"W
RAISES 20°
LOWERS 20°
SIDE BENDS 15°
ROTATES 15°
• TABLE HEIGHT: ADJUSTS FROM 24"-36"
• USE 2 BUTTON HAND SWITCH TO CONTROL TABLE HEIGHT AND TO RAISE AND LOWER THE FOOT SECTION
• USE HANDLES TO ADJUST SIDE BEND AND ROTATION
• FOAM: 1¾ " FIRM DENSITY
• VINYL: 34 OZ WITH ANTIBACTERIAL PROTECTION
• LIFTING CAPACITY 400 LBS
• 4 HEAVY DUTY 3.5" TOTAL LOCK BALL BEARING CASTERS
• 110 VOLTS 60 HZ
14-3025 2-Section Bariatric 234 Treatment Table
• 2-Section Treatment Table
• 76"L x 34"W
• Height: 18"-37"
• 1 3/4" Firm Density Foam
• Backrest: 27" x 34" with contoured face opening, raises 75 degree
• Body: 49" x 34"
• 500lbs. Capacity
• Power-assisted Caster System
• Made in USA
14-3005 Mat Platform 645 Fixed Height with Adjustable Backrest
• 29" x 48" Adjustable Backrest Raises 80 degrees with gas spring assist. Locks in any position.
• 55" x 48" Body Section Upholstered top with 2" firm density foam.
• Fixed Height: 20"
• Made in USA
14-3006 Mat Platform 643 Hi-Lo with Adjustable Backrest
• 29" x 48" Adjustable Backrest Raises 80 degrees with gas spring assist. Locks in any position.
• 55" x 48" Body Section Upholstered top with 2" firm density foam.
• Adjustable Hi-Lo: 20-30"
• Made in USA
10-4502 Elite Hi-Lo Table
A vertical tilt table custom built to accommodate the diversified techniques you use every day, and special needs of your patients. Now available with the new Cordless Power option eliminating the need for power bars, cables and electrical outlets to power your ELITE E4. Simply charge your table overnight for a full week of cable free operation. Want more? Add on the extra battery pack and charger so you always have a fully charged battery available. The table lifts and performs equivalent to a similar corded table. Smooth range of Lateral Flexion (20 degrees)

  • Electric tilt motor is powerful, quiet and smooth, rated to 230 kg. (500 lbs.)+
  • Table Base Height: 22" or 24"
  • Multi-directional headpiece - Tilt, Elevation and Spread
  • 21" wide table surface
  • Cervical headpiece can be raised up to 6" above cushions
  • Cervical drop (forward motion oriented or straight down motion)
  • Easy drop foot cocking pedal on both sides of table
  • Tension Control can be Left or Right
  • Elevating thoracic and Pelvic/Lumbar sections (each tilt upward to 15 degrees)
  • Knee break (adjusts up 20 degrees) with ankle rest extension
  • Easy access to adjustment controls
  • Low maintenance, dependable function
  • Sturdy welded steel construction
  • Table base color: black or white
  • Wide assortment of colors available in Healthcare-grade upholstery
Optional:
  • HP-FLEX Headpiece - Includes all the features of our standard headpiece plus long axis transaction  $580.00
  • HP-FLEX-l Headpiece - Includes all the features of the HP-FLEX Headpiece plus lateral flexion    $780.00
  • Drops – Pelvic/Lumbar $250.00, Upper and Lower Thoracic $500.00, or Full Thoracic $250.00
  • Dual Footswitch - High Low control  $200.00
  • Abdominal Breakaway  $350.00
  • Abdominal Drop in Breakaway (hand cocked)   $650.00
  • Cordless Power  $400.00
  • Extra Battery Pack   $280.00
  • 24" Wide Table Surface  $100.00
  • Protective Cover $  60.00
  • Leather upholstery $700.00
10-4501 Elite Hi-Lo & Elevation
A High Low, vertical & elevating table custom built to accommodate the diversified techniques you use every day. Now available with the new Cordless Power option eliminating the need for power bars, cables and electrical outlets to power your ELITE E5. Simply charge your table overnight for a full week of cable free operation. Want more? Add on the extra battery pack and charger so you always have a fully charged battery available. The table lifts and performs equivalent to a similar corded table. Motorized Deep Flexion depth (22-25 degrees)

  • Variable Elevation Height: your choice of 21" - 29" or 24" - 32"(foot switch controlled)
  • Electric motor is powerful, quiet and smooth, rated to 230 kg. (500 lbs.)+
  • Variable cushion position
  • Easy access to adjustment controls
  • 21" wide table surface
  • Multi-directional headpiece - Tilt, Elevation and Spread
  • Cervical drop (forward motion oriented or straight down motion)
  • Easy drop foot cocking pedal on both sides of table
  • Tension Control can be Left or Right
  • Elevating thoracic and Pelvic/Lumbar sections (each tilt upwards to 15 degrees)
  • Ankle rest extension
  • Low maintenance, dependable function
  • Sturdy welded steel construction
  • Table base color: black or white
  • Wide assortment of colors available in Healthcare-grade upholstery
Optional:
  • HP-FLEX Headpiece - Includes all the features of our standard headpiece plus long axis transaction  $580.00
  • HP-FLEX-l Headpiece - Includes all the features of the HP-FLEX Headpiece plus lateral flexion          $780.00
  • Drops – Pelvic/Lumbar $250.00, Upper and Lower Thoracic $500.00, or Full Thoracic $250.00
  • Dual Footswitch - High Low control    $200.00
  • Abdominal Breakaway                           $350.00
  • Abdominal Drop in Breakaway (hand cocked drop) $650.00
  • Cordless Power                                      $400.00
  • Extra Battery Pak                                     $280.00
  • 24" Wide Table Surface                         $100.00
  • Protective Cover for knee break and foot extension      $  60.00
  • Leather upholstery                                                               $700.00
10-4500 Elite High Low Manual Flexion Table
Ultimate versatility best describes new High Low Flexion table. Featuring motorized high low operation, manual flexion, optional motorized distraction and your choice of drops.

  • Variable cushion position
  • Easy access to adjustment controls
  • Table is available in a height of 24" only
  • 21" wide table surface
  • Multi-directional headpiece - Tilt, Elevation and Spread
  • Cervical drop (forward motion oriented or straight down motion)
  • Easy drop foot cocking pedal on both sides of table
  • Tension Control can be Left or Right
  • Elevating thoracic and Pelvic/Lumbar sections each tilt upwards to 15 degrees (not available when ordering the electric distraction feature)
  • Ankle rest extension
  • Low maintenance, dependable function
  • Sturdy welded steel construction
  • Table base color: black or white
  • Wide assortment of colors available in Healthcare-grade upholstery
  • Smooth range of Lateral Flexion (20 degrees)
  • Deep Flexion depth (22-25 degrees)
  • Able to perform figure 8 (ROM)
  • Pelvic cushion will drop in either a Flexed / Neutral / Extended position
  • Table can be locked while in a flexed position
  • Removable flexion control handle offers 3 different height adjustments and can be removed when not in use
  • Quiet and smooth high low operation using a convenient foot switch panel
  • Electric tilt motor is powerful, quiet and smooth, rated to 230 kg. (500 lbs.)+
  • Standard Multi-directional headpiece - Tilt, Elevation and Spread
Optional:
  • HP-FLEX Headpiece - Includes all the features of our standard headpiece plus long axis transaction  $580.00
  • HP-FLEX-l Headpiece - Includes all the features of the HP-FLEX Headpiece plus lateral flexion          $780.00
  • Drops – Pelvic/Lumbar $250.00, Upper and or Lower Thoracic $500.00, or Full Thoracic $250.00
  • Dual Footswitch - High Low control             $200.00
  • Abdominal Breakaway                                    $350.00
  • Abdominal Drop in Breakaway (hand cocked drop)   $650.00
  • Electric Distraction 5” footswitch controlled $750.00
  • Electric Tension for Manual Flex:                   $600.00
  • 24" Wide Table Surface                                   $100.00
  • Protective Cover for knee break and foot extension      $  60.00
  • Leather upholstery                                            $700.00
Traction Unit


23-6030 Mettler MTD4000 Traction Decompression
• Easy to use
• Active displays show all treatment parameters
• Multiple sensors and safety controls
• High strength traction cable
• Fits almost any existing table platform
• Adjustable Hold/Rest times
• Continuous and Intermittent traction
• Multiple speed selections
• Smooth, quiet operation
• Two year limited warranty
Specifications:
• Maximum Output Force: 90 Kg / 198 lb
• Traction Speed Fast — ~5-6 seconds to reach maximum force
• Normal — ~12-15 seconds to reach maximum force
• Slow — ~22-25 seconds to reach maximum force
• Hold / Rest Period 1 ~ 99 seconds
• Treatment Time 1 ~ 99 minutes
• Treatment Mode Continuous / Intermittent
• Display Yellow / Green Digital LED Display
• Patient Safety Switch 2 Pin connector, push button normally closed
MDALL no. 83633


23-6020 ITO TM-400 Traction Unit
• Large and high-visibility LCD screen. Screen display in ten languages.
• Eight traction modes: intermittent, static, progressive, regressive, cyclic, and combinations thereof.
• Pulling speed selectable from five preset values.
• The number of ramp steps and the pause time of each step are selectable. Combining these parameters with pulling speed and traction mode makes the model suitable for various symptoms.
• Thirty (30) free program memories.
• Automatic calibration of traction force to maintain correct traction force (PAT.P).
• Both the set value and the actual value are displayed on the screen.
• One of three melodies signaling the end of therapy can be selected to distinguish which system has completed therapy.
• Pleasant touch key sound. Either monotone or sol-fa sounds can be selected.
Specifications:
• Maximum Output Force: 1-90 Kg (198 lb)
• Weight: 14 Kgs
MDALL no. 77186


23-6000 Chattanooga TX Traction Unit
• Easy to operate
• 270° Pivoting User Interface
• Digital Monochromatic Touch Screen Interface
• Patient Data Cards record up to 14 treatment sessions
• Store up to 10 user defined protocols
• Intermittent, Static and Cyclic Traction
• Progressive and Regressive steps
• User-defined Hold, Rest and Treatment times
• Traction tension parameters: 0-200 lbs
Standard Accessories:
48082 Patient Interrupt Switch
27465 Patient Data Cards (5x)
MDALL no. 159

Traction Tables
Item no. 14-3021 2-Section 420 Fixed Height Traction Table
• Size: 27"W x 76"L x 30"H
• Overall Length: 85"
• Body Section: 34" x 27"
• Foot Section: 42" x 27"
• Other: 12" x 66" Upholstered Shelf Included
• Capacity (lbs): 400
These treatment tables are strong, stylish and affordable. For the clinician, the this series offers full height adjustment and section mobility so the patient can be placed in the proper position for maximum results with minimum effort. For the patient, comfort and easy access getting on and off the table.
Features:
34 oz. Heavy-duty vinyl with Permablok 3(R) bacterial protection.
1½" Firm density foam tops.
Radiused, seamless corners on upholstered components.

Item no. 14-3045 4-Section 400 Hi-Lo Traction Table
• Size: 27"W x 76"L
• Overall Length: 99"
• Height: 18-37"
• Friction Free Lumbar separates 5" and rolls on 4 steel ball roller bearings.
• The rolling section can be locked in any position with.
• Head Section: 15" x 27" Raises 45 Degrees, Lowers 90 Degrees, Contoured Face / Nose opening.
• Center Section: 10" x 27"
• Thoracic Section: 17-1/2" x 27"
• Foot Section: 33" x 27" Raises 80 degrees.
• Capacity (lbs): 400
• Foot switch with up/down button


Item no. 14-3046 4-Section BA400 Hi-Lo Traction Table
• Size: 27"W x 76"L
• Overall Length: 99 "
• Friction Free Lumbar separates 5" and rolls on 4 steel ball roller bearings.
• The rolling section can be locked in any position with. • Head Section: 15" x 27" Raises 45 Degrees.
Lowers 90 Degrees. Contoured Face / Nose opening.
• Center Section: 10" x 27"
• Thoracic Section: 17-1/2" x 27"
• Foot Section: 33" x 27" Raises 80 degrees.
• Capacity (lbs): 400
• Foot Bar Activated Hi-Lo Control on Both Sides


Item no. 14-3047 4-Section SX-4000 Hi-Lo Traction Table
The SX Series Treatment Tables offer a unique design which will work well in smaller areas in the clinic. This design has exceptional stability, full height adjustment and section mobility. The flexibility of theses tables allows the patient to be placed in proper position to achieve maximum results with minimum effort.
• Size: 27"W x 76"L
• Overall Length: 94"
• Height: 18-37"
• Table separates 4" with a spring return and locks in any position.
• 4 total lock swivel casters
• Head Section: 15" x 27" Raises 25 Degrees, Lowers 80 Degrees, Contoured Face / Nose opening.
• Thoracic Section: 18" x 27"
• Center Section: 12" x 27"
• Foot Section: 31" x 27" Raises 70 degrees.
• Capacity (lbs): 400
• Foot switch with up/down button

Item no. 14-3060 6-Piece 450 Hi-Lo Traction Table
6-Pcs: 27" x 76" Overall: 99"
• Hi-Lo Height: 18-37"
3-piece head section:
• Center: 15 x 13"
• Arm rest: 12.5" x 5.5"
• Raises 45 degrees, lowers 90 degree, contoured face and nose opening
• Thoracic: 17.5" x 27"
• Center Section: 10" 27"
• Foot Section: 33 x 27" raises 80 degree
Optional: Foot Bar Activated Hi-Lo Control on Both Sides for $250.00

Item no. 14-3090 Flexion Stool
• Top: 12" x 19"
• Height: adjustable from 12-18"
15-2100 Intersegmental Traction Table
- Motorized Elevation & Vibration
- Simple & easy to use controls
- Lock feature prevents patient from changing settings
- Ultra smooth nylon massage rollers
- Vibration timer from 0-30 minute
- Treatment for full spine or selectable for one area
- Size: 24"H x 77"L x 25"W
Standard Includes: Gel Neck Roll, bolster Knee Pillow, Protective Cover for Foot Area
Manufactory Warranty:
Lifetime: Rollers
5 Year: Motors
1 Year: Parts & Labour
Options:
Remote Control System
Q401: Face Slot Cut Out
Q400H: Heat
Q400P: Patient Assist Bar

 

Copyright © 2016 Kosim Group Company Inc.
55 Valleywood Dr, Markham,
Ontario, Canada L3R 5L9